Teletronics EZBridge AP Manual de usuario descargar pdf (Pagina 2)

002

2503500500

o) Click Properties. You will then see a dialog box

shown below.

Figure 4: IP Address

p) Ensure your TCP/IP settings are correct

follows.

To use static IP address, select Specify

an IP

address. Type 192.168.1.200 in the IP address

field and 255.255.255.0 in the Subnet Mask field.

The IP address must be 192.168.1.x. The value of x

should be ranged from 1 to 254 and is never used

by other PCs.

q) Click OK

again. Windows may copy files to your

computer, and then

you will be asked to restart

your PC. Click Yes to restart

your computer and

initiate the new settings. If you aren’

t asked,

manually restart the computer to ensure the

system has used the IP address

you just

specified.

r) Open your Web browser and

type

“HTTP://192.168.1.90” in the Address

field.

Then press Enter.

Figure 5: Enter Web Address

s) A logon dialog box will appear. The default

User

Name is root and Password is root. Put

User

Name and Password and Click OK.

Figure 6: User name/Password Dialog Box

t) After you click OK, the Setup screen is

shown

like the following figure.

Figure 7: Setup Screen

g) Click the Configuration tab and type texts in the

Network name field, wirelesslan

, for example.

After setting the Network name, click Save

Reboot, and then OK.

The Configuration screen is shown as the

following

figure.

For the purpose of security, you can enable the WEP

function. Follow the steps below (take 64 bit encryption

for example):

h) Click the Encryption tab, and then

select the

WEP enabled function.

i) Choose 64 bit on the right side of the

WEP key

lengths field. Type

10 hex digits into the key box

at the right of the WEP key 1 field.

j) Choose Key 1 on the right side of the

WEP key

to use field.

k) Select the Deny unencrypted data option.

l) Choose Shared Key in the Authentication field.

m) Click Save, Reboot, and then OK in sequence.

n) The Configuration screen is shown as

the

following figure.

Once you have configured all of the PCs on your

network with appropriate

values of Network name and

WEP key, the access point setup and installation are

complete.

For instructions on MAC address filtering or other

advanced configurations, refer to your User Manual.

2503501200

1 2

Donald^^11 1
2503501200 2

Comentarios a estos manuales

Sin comentarios

Teletronics EZBridge AP Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Comunicación Teletronics EZBridge AP